 |
FOOD
GRADE SYNTHETICS
Ultrachem now has a complete line of Premium Quality Food Grade Synthetic
Oils and Grease to compliment our line of Industrial Lubricants. These
products meet all of the requirements of the USDA and FDA H-1 regulations,
21 CFR 178.3570, and conform to the requirements of NSF. This Omnilube
line of oils for incidental food contact is available for compressor,
hydraulic, gear and multipurpose applications as follows:
Compressor Oils
- Omnilube
520, 546, 568,
5131 and 640.
- These oils are ISO VG 32 through 150 H1 food grade oils for
use in a wide variety of rotary screw, rotary vane, and reciprocating
compressors and vacuum pumps. Recommended change-out intervals
are 2,000 to 4,000 hours.
- Omnilube
32/46. � A Superior Premium Product, this compressor
oil is suitable for use in most rotary screw compressors requiring
food grade oil. It offers a unique additive that enables it to
last 50 to 100% longer than our other food grade compressor oils.
Multipurpose Hydraulic
Oils
- Omnilube FG 1000
Series Multi-Purpose Hydraulic Oils. - These oils are suitable
for hydraulic systems, bearings, oven chains, canning applications,
and valves.
- Omnilube FG 2000
Series High Load AW Multi-Purpose Hydraulic Oils. - These premium
quality oils are intended for use where longer oil change intervals
or more extreme duty cycles require a longer lasting, heavier
duty product.
Gear Oils
- Omnilube FG 1000
Gear Oil Series. - These oils are suitable for use in gear sets,
worm gears, bearings and as chain lubricants.
- Omnilube FG 2000
Severe Load Gear Oil Series. - These premium quality oils are
intended for use in more severely loaded applications than the
1000 Gear Oil Series.
Grease
- Omnilube FGM2 Grease.
- This multi-purpose PAO based calcium complex sulfonate grease
offers outstanding performance in a wide variety of applications
including use in wheel bearings and as chassis lubrication.
Chain Lubricant
- Omnilube PG-220 FG
Chain Lubricant. - This H-1 food grade polyalkylene glycol based
chain oil is designed for use on chains where higher temperatures
are expected. It will not leave deposits associated with some
other oils.
|
|
