Oil / Water Separators absorbALL Enviro  Ultrachem's new absorbALL Enviro is designed to be used for small compressors with less than 65 cfm of output. It will handle many synthetic and petroleum oils up to 65 cfm. Not recommended for separation of polyglycol coolants or oils. Click here for product specifications.   absorbALL 520 The absorbALL 520 model readily separates most oils from the condensate water by absorbing the oil contained in the condensate. Separates most oils up to 300 cfm and will work with polyglycol coolants up to 200 cfm with the proper filter. Click here for product specifications. Click here for replacement bags.   absorbALL 1250 The absorbALL 1250 model units can handle ALL oils found in an air compressor. These include mineral oil, ATF, semi-synthetics, silicones, polyglycol coolants, diesters, polyol esters and PAO oils. Unlike other systems, the abosorbALL will actually absorb the oil and release the water.  Separates most oils up to 1250 cfm and will work with polyglycol coolants up to 1000 cfm with the proper filter.   It works!  Click here for product specifications. Click here for replacement bags. Click here for a schematic flow chart.   absorbALL Extender The Extender is an add-on unit to either the front or side of the 1250 above. It doubles the capacity of the 1250 and installs very easily The Extender may be added later, when a customer's air requirements increase. All tower lids are numbered to correspond with the appropriate tower.  We have tried to make these absorbALLs as customer friendly as possible. Click here for product specifications. Click here for replacement bags. Click here for a schematic flow chart.
	Home | The Company | Products | Search | Cross Reference Products Service Bulletins | Contact Us | Info Request | Site Map | Admin Copyright ©zz 2004 Ultrachem, Inc. Website by Advance Design